Description
This bundle contains the following products:
UPPER
- DB15223 WYLDE, MID LENGTH, 18″, HEAVY, 416R STAINLESS STEEL, 1:7
- DB15 FORWARD ASSIST ASSEMBLY, INCLUDES PAWL, BUTTON, PAWL ROLL PIN, PAWL SPRING & PAWL DETENT
- DB15 TACTICAL FORGED 7075 T6 ALUMINUM BLACK UPPER RECEIVER
- DB15 ETCHED 223 WYLDE EJECTION PORT DOOR
- DB15 EJECTION PORT COVER PIN
- DB15 EJECTION HINGE SNAP RING, 1/8″ SHAFT
- DB15 LOW-PROFILE GAS BLOCK
- DB15 GAS BLOCK ROLL PIN (5/64″(.078) X 5/16″)
- DB15 KNURLED SET SCREWS FOR GAS BLOCK (#10-32 X 3/16″)
- DB15 556 CRUSH WASHER
- DB15 556 MUZZLE BRAKE
- DB15 MID-LENGTH GAS TUBE
- DB15 DIAMOND SERIES V2 15″ BLACK M-LOK HANDGUARD (S RAIL) WITH FULL PICATINNY RAIL AND SLING QD MOUNT, INCLUDES BARREL NUT AND ATTACHMENT SCREWS
BCG
BOLT CARRIER GROUP AR15/M16
0.0001+/- TOLERANCE
100 % CUSTOMER SATISFACTION
99.9% REPEATABILITY
- Lugs are machined with the proper radius per true mil-spec tolerances. Independent HP white proof testing exceeded over 90,000 PSI without failure.
- Outer diameter machined to all critical surfaces within +/- .0005 inches.
- Rounded cam pin rides in a fully chamfered cam path.
- Gas key with rounded leading edges ensures positive functioning in all makes and grades of uppers and buffer tube combinations.
- Properly staked and torqued grade 8 hex screws per the true mil-spec.
- Carrier body OD and ID are hard turned after heat treatment to +/- .0005 inches.
- Multiple commercial finishes and coatings are available, engineered to their unique tolerances.
The BCG is crucial to the proper function of the MSR and is often considered the heart of the firearm. Everything from the metallurgy, weight and finish can seriously impact accuracy, reliability, and durability.
CHARGING HANDLE
- Material: 7075-T6 aluminum
- Fits all mil spec AR15/M16 Rifles
- Finish: Type III hard-coat anodized
- Perfect replacement for any factory charging handle
- Latches are also 7075-T6 aluminum
- Oversize ambidextrous release levers on both sides, 2.78″ total width across the handles
- Set-Back Latches work great for large optics
- Allows for one handed manipulation
- Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses
- Weighs in just under 1 ounce!
- No gun smith required
- Made in America
VORTEX DIAMONDBACK TACTICAL 4-12 x 40 RIFLE SCOPE
From Vortex:
Exposed tactical turrets built for dialing elevation and windage allow quick and precise bullet drop and wind drift compensation at extended ranges. When we say precise, we mean it. These turrets track better than any Bloodhound and reliably return to zero every time. A zero-reset feature lets you re-index the zero reference marks on both turrets after sight in, while fiber optic rotation indicators integrated into the turrets provide a visual cue of your turret’s position.
Specifications:
-Magnification: 4-12 x
-Objective Lens Diameter: 40 mm
-Eye Relief: 3.9 inches
-Field of View: 23.6-7.9 feet/100 yards
-Tube Size: 1 Inch
-Turret Style: Tactical
-Adjustment Graduation: 1/4 MOA
-Travel per Rotation: 12 MOA
-Max Elevation Adjustment: 70 MOA
-Max Windage Adjustment: 70 MOA
-Parallax Setting: 100 yards
-Length: 14.2 inches
-Weight: 16.2 ounces
VORTEX CANTILEVEL MOUNT 1 INCH 2″ OFFSET RINGS
Use this cantilever mount for mounting 1-inch telescopic sights onto flattop-style AR-15 rifles. The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on an AR-15—aluminum construction.
NOTE:
The cantilever ring mount positions the center of the rifle scope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.
–All NFA Regulations apply. Please check your local and state laws before ordering. Contact your local ATF Field Office with any NFA questions you may have.–
