Description
This bundle contains the following products:
UPPER
DB15 .300 AAC CARBON SERIES 10″ UPPER ASSEMBLY W/ 9.5″ M-LOK , FLAT DARK EARTH
- DIAMONDBACK BARRELS DB15P 300 BLACKOUT PISTOL, HEAVY, CHROME-MOLY, FREE FLOAT, BLACK NITRIDE, 1:8 TWIST, 10.5 ” BARREL
- DB15 FORWARD ASSIST ASSEMBLY, INCLUDES PAWL, BUTTON, PAWL ROLL PIN, PAWL SPRING & PAWL DETENT
- DB15 FLATTOP FORGED 7075 T6 ALUMINUM UPPER
- BLACK ANODIZED HARDCOAT
- DB15 ETCHED 30CAL EJECTION PORT DOOR
- DB15 .750 LOW PROFILE GAS BLOCKS W/SCREWS AND PINS
- DB15 GAS BLOCK ROLL PIN (5/64″(.078) X 5/16″)
- DB15 KNURLED SET SCREWS FOR GAS BLOCK (#10-32 X 3/16″)
- DB15 CRUSH WASHER, 30 CAL .625
- DB15 300 FLASH HIDER (A2 THREADED WITH 5/8X24)
- DB15P PISTOL LENGTH GAS SYSTEM
- DB15PC 9″ M-LOK RAIL
BCG
BOLT CARRIER GROUP AR15/M16
0.0001+/- TOLERANCE
100 % CUSTOMER SATISFACTION
99.9% REPEATABILITY
- Lugs are machined with the proper radius per true mil-spec tolerances. Independent HP white proof testing exceeded over 90,000 PSI without failure.
- Outer diameter machined to all critical surfaces within +/- .0005 inches.
- Rounded cam pin rides in a fully chamfered cam path.
- Gas key with rounded leading edges ensures positive functioning in all makes and grades of uppers and buffer tube combinations.
- Properly staked and torqued grade 8 hex screws per the true mil-spec.
- Carrier body OD and ID are hard turned after heat treatment to +/- .0005 inches.
- Multiple commercial finishes and coatings are available, engineered to their unique tolerances.
The BCG is crucial to the proper function of the MSR and is often considered the heart of the firearm. Everything from the metallurgy, weight and finish can seriously impact accuracy, reliability, and durability.
CHARGING HANDLE
The Breek Arms WARHAMMER MOD2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The wide set-back latches work great for large optics. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability!
The new MOD2 design features improvements for further reducing gas blowback in the shooter’s face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed!
- Material: 7075-T6 aluminum
- Fits all mil spec AR15/M16 Rifles
- Finish: Type III hard-coat anodized
- Perfect replacement for any factory charging handle
- Latches are also 7075-T6 aluminum
- Oversize ambidextrous release levers on both sides, 2.78″ total width across the handles
- Set-Back Latches work great for large optics
- Allows for one handed manipulation
- Higher Rear Shelf and Relief Cuts to Divert Suppressor Gasses
- Weighs in just under 1 ounce!
- No gun smith required
- Made in America
MAGPUL PMAG® 30 AR 300 B GEN M3™, 300 BLK
The PMAG 30 AR 300 B GEN M3 is a purpose-designed magazine for rifles chambered in 300 Blackout® (300 BLK). Since its inception, 300 BLK shooters have had to use a magazine designed for another cartridge, limiting its ultimate performance and compatibility. One of the key features of 300 BLK is the compatibility with 5.56x45mm parts, but with the magazine, it is a compromise to do so. Due to the wide variety of projectile weights and profiles potentially decreasing overall reliability, a dedicated 300 BLK magazine was a logical step for the PMAG line.
In addition to the performance gained by a dedicated mag, the PMAG 30 AR 300 B also offers a safer way to feed your 300 BLK rifle. When using 5.56x45mm mags, the potential to chamber and fire a 300 BLK round in a 5.56x45mm rifle with catastrophic results requires diligent ammunition management by the shooter. The PMAG 30 AR 300 B’s distinct rib design and smoother upper-half texture provides the shooter a distinct visual and tactile difference from any other PMAG to mitigate dangerous cross-loading issues.
Along with optimized 300 Blackout performance, the PMAG 30 AR 300 B incorporates all of the GEN M3 features such as our next-generation impact and crush resistant polymer, aggressive front and rear texture, an easily removable slim floor plate, and a paint pen dot matrix for marking and identification.
Made in the USA.
DIAMONDBACK FIREARMS LOGO AR PISTOL CASE
Hard plastic case with Diamondback logo, corrugated foam inserts equipped with removable Velcro straps. Inside Dimensions: 31.82 x 11.39 x 5 inches
–All NFA Regulations apply. Please check your local and state laws before ordering. Contact your local ATF Field Office with any NFA questions you may have.–
This product is subject to a longer handling time. Please allow up to 2-3 weeks for shipping.
***Installation of AR-15 upper assemblies with certain features including, but not limited to: flash hiders, bayonet lugs, and threaded muzzles may violate state and/or local laws.***
NOTE: Prices, specifications, and availability are subject to change without notice. We reserve the right to correct typographic, photographic, and/or descriptive error shipping.
